[. . . ] This oven has been designed in accordance with UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C). [. . . ] 6 cm) For the approved model number combinations, refer to the undercounter label located on top of the oven chassis and on the bottom of the cooktop burner box. NOTE: For undercounter installation, it is recommended that the junction boxes for oven and cooktop be located in the adjacent right or left cabinet. 5 cm) minimum diameter hole should have been drilled in the upper rear right or left corner of the side wall surface to pass the appliance cable through to the junction box. 4 cm), dimension “G” can be increased the same difference for induction combinations. 5 cm) minimum diameter hole should have been drilled in the upper rear right or left corner of the side wall surface to pass the appliance cable through to the junction box. The upper shaded areas are recommended locations for recessed junction box for 120-volt grounded outlet for cooktop. Lower shaded areas are recommended locations for flexible or rigid gas pipe installation. The gas connection on the cooktop is on the right (same location as “J” in the above diagram). [. . . ] The gas pipe can be installed on either side of the cutout, and either through the floor or through the wall. [. . . ]